Seller: aspecttv.co.uk
DK DIGITAL (GERMANY) AV-R600 6.1/7.1 HIFI Amplifier Great value amplifier with integrated Dolby Digital, DTS & Dolby Pro Logic decoders and included remote control. AV Receiver AV-RA600 • Dolby Digital 6.1EX, DTS IT & Pro Logic II• Integrated Dolby Digital, DTS & Dolby Pro-Logic decoders• Dolby bass manager• Dual coloured VFD display• Surround speaker output: 245 Watts• Central speaker output: 245 Watts• Inputs: 4x AV, 3x S-video, 3x Stereo L&R, 2x coaxial, 3x optical, 2x YUV• Outputs: 1x S-video, 1x Stereo L&R, 1x coaxial, 1x YUV, 1x headphones and 1x subwoofer• AM/FM RDS radio (30 station memory) with radio text, programme type and time display• Remote control• Dimensions (WxHxD): 430 x 350 x 140mm• Colour: silver Front Panel Overview: 1. POWER - power on/off 2. Standby 3. STANDBY - In-/circuit breaker ready status 4. DISPLAY - normal range for operating information 5. VOLUME - volume controls 6. STATION - for accessing the radio station memory 7. MEMORY - for storing a station 8. TUNING – tune down 9. TUNING + - tune up 10. PHONES - headphone output 11. SURROUND - switches the rear speakers off or on 12. WOOFER ON/OFF – switches the subwoofer off or on 13. DIRECT IN - activates the 6.1 input 14. DIGITAL IN – switches to digital input Entrance channel over (so far available) 15. SURROUND MODE - change stereo surround modes 16. STEREO - for activating stereo mode (only front speakers and subwoofer are active) 17. PRO LOGIC II - activates Pro Logic II mode 18. DTS/DOLBY DIGITAL – select DTS or Dolby Digital modes 19. AV 3 IN – activate front mounted AV input 3 20. RESET – restores factory settings 21. INPUT SELECTOR – selects input Rear Overview: 1. DVD IN, VIDEO 1 IN, VIDEO 2 IN - 3x video inputs 2. DVD, VIDEO 1, VIDEO 2 - Stereo inputs 3. VIDEO OUT - Video output 4. TAPE OUT - Tape output 5. DVD-S IN, VIDEO 1-S IN - 2 x S-Video input 6. VIDEO OUT - S-Video output 7. TAPE IN, AUX, PHONO – Stereo input 8. COAXIAL OUT – Coaxial output 9. DVD COAXIAL IN – DVD coaxial input VIDEO 1 COAXIAL IN - VIDEO 1 coaxial input VIDEO 2 OPTICAL IN - VIDEO 2 optical input 10. COMPOSITE VIDEO – composite video in and out 11. ANTENNA - FM & MW antenna inputs 12. 6.1 DIRECT IN – 6.1 audio input 13. SUB LINE OUT – line out for an active subwoofer 14. SPEAKERS – speaker outputs 15. Mains cable Information: PRO LOGIC IIx The Dolby® Pro Logic® IIx technology (PLIIx) extends the Dolby Pro Logic II (PLII) matrix decoding technology. PL IIx up converts a Pro Logic II signal to a 5.1 or 6.1 output allowing perfectly balanced audio reproduction. Dynamic compression With the dynamic key you can alter the dynamic compression of the sound. This alters the volume difference between loud and quiet passages, between explosions and whispering for example. If you have sensitive neighbours and you would like to watch a movie at night, you should place this as high as possible. Maximum compression is DRC = 4/4, minimum compression, with full dynamics, is DRC=0/4. Simply press the DYNAMIC key to adjust. Available Surround kinds Surround sound provides the live experience in your living room, the sort of sound that it normally only available in cinemas. Select the suitable Surround mode according to the source. Always make sure that all speakers are attached to enjoy DTS, Dolby Digital and Dolby Pro Logic II surround as they should be. We recommend using the centre speaker for DTS, DOLBY DIGITAL and Dolby Pro Logic Surround II. Press the DOLBY DIGITAL key Activate the DOLBY PRO LOGIC or DTS enterprise, if the equipment is in analogue mode. If the signal is in the Dolby Digital format the system will switch itself automatically DTS Digital Surround Mode This equipment features DTS Digital Surround. This mode gives you the benefit of 5.1 (6) different high quality audio channels, for DVDs, compact discs etc. this enables you to have an unusually spatial 360° sound experience. DTS compatible films should always be played in this mode. (DTS is a trade mark of DTS Technology, LLC. Manufactured under license from DTS Technology LLC.) DOLBY DIGITAL mode This mode gives you the benefit of 5.1 (6) different high quality audio channels from Dolby Digital sources. Connect a DVD player with a DOLBY digital output to the digital input (coaxial or optical) and experience great sound quality, accurate spatial representation and optimal dynamics. This results from 5 independent audio channels with full frequencies as well as the “LFE” (low frequency only effects channel) subwoofer channel. This three dimensional sound comes from 6 different audio channels resulting in superb spatial dynamics. Dolby Digital EX Using rear surround sound speakers, the Dolby Digital source runs through the 6.1 channel matrix decoder. DTS-ES Discrete 7.1 With the addition of another rear surround channel this new format allows all 6.1 channels to be used independently. This independence of the channels allows for very high quality rendition with increased spatial dynamics. K. DTS-ES matrix 7.1 This format codes the rear surround channel matrix and moves it to the left and right surround channels. The decoding takes place through an extremely precise matrix decoder. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double D Symbol are trade marks of Dolby Laboratories.
Our Price: £299.99
|
|
