Seller: aspecttv.co.uk
Permits your Existing Speakers to remain on when using RF Cordless Speakers in another room. Ideal for RF Cordless Speakers when used as Rear Speakers in a Surround or Pro Logic System.Most RF cordless transmitters occupy the headphone jack on your system which cuts the sound to your existing speakers. The GAD100 enables continued sound output from your mains speakers when using RF cordless satellite speakers or headphones. * Simply hook up to speaker terminals on your system or amplifier * Operates with any system or amplifier irrespective of power output * Ideal for RF Cordless Speakers when used as Rear Speakers in a Surround or Pro Logic System * Permits your Existing Speakers to remain on when using RF Cordless Speakers in another room * Use your RF Cordless Headphones anywhere within range and your Main Speakers can remain on if desired * Also compatible with Infra-red Transmitters * Easy to install * Powered by AC adaptor (included) * Built-in mono/stereo switch * Main speaker on/off switch * Overload warning LED's * Cordless Speakers or Headphones not included Specifications * Can be used on hi-fi systems with power ratings from 5-100 Watts * Line output 1 Volt max. * AC power adaptor 16VAC * Max attenuation 20dB * Max power consumption 100mA * Stereo separation 70dBTypical Complete InstallationOperationThe GAD100 will allow you to operate your existing RF transmitter/loudspeakers/headphone vie your home hi-fi system without the need to use the headphone or line out sockets which often are used for other purposes or simply not fitted.Ensure that ALL connections have been made before attempting to operate the system. 1. Switch on your RF transmitter/loudspeakers and set the volume to normal listening levels. NOTE: volume on RF speakers will increase as main system volume increases 2. Switch on your hi-fi system and operate it in the normal way 3. The sound from your hi-fi will be heard through your existing hi-fi loudspeakers 4. The sound will also be heard via your Transmitter/RF loudspeakers/headphone 5. Check that the overload LED indicators on the GAD100 are not illuminated. If illuminated then reduce the volume of your hi-fi accordingly or reduce the bass boost or Equaliser effect (if fitted) 6. The GAD100 is fitted with a MONO switch which should be engaged if the RF loudspeakers are operating in area's where stereo effect is not required 7. The GAD100 is fitted with a SPEAKER OFF/ON switch which should be set to the OFF position if the sound of the hi-fi is not required to be heard through the hi-fi loudspeakers NOTES: * RF headphones can also be used with this system * Move the Loudspeaker ON/OFF switch to the OFF position if you do not want to hear the audio from your hi-fi loudspeakers * Move the MONO/STEREO switch to the MONO position when using individual RF loudspeakers in separate rooms. This way you will hear all of the audio instead of the left or right channel only
Our Price: £38.99
|
|
